Industrial Self-Cleaning Air Filter

Self-Cleaning Air Filter is a new type of high-efficiency air Filter with automatic ash cleaning function, especially suitable for long-term continuous air purification of gas equipment under multi-dust conditions. It can effectively filter fine pollutants discharged in production processes. It is applied in air compressor stations, oxygen generation stations, air conditioning air supply systems, gas turbines, blast furnace blowers and other industries, filtering air particles and impurities.

Working Principle

• Filtration Process: Dust-laden air is sucked in by the air compressor through the primary coarse filter box, then passes through the high-efficiency filter cylinder. Dust adheres to the high-efficiency filter cylinder due to gravity, inertia, diffusion and contact retention. Clean air enters the venturi tube through the sealing gasket, converges to the gas collection port and is sucked into the air compressor from the clean air outlet.

• Self-Cleaning Process: When the pressure difference exceeds 600 Pa, the PLC controls the reverse self-cleaning process (0.1-0.2 seconds) in sequence by timing or pressure difference. The pulse solenoid valve opens, and the compressed air in the air storage tank is ejected through the diaphragm valve and venturi reverse blowpipe to clean the dust off the filter cylinder without interrupting normal filtration.

Features

1. Intelligent Control: Three self-cleaning modes: timing, pressure difference and manual, controlled by an intelligent distributor.

2. Automatic Cleaning: Realizes automatic cleaning of filter elements without affecting normal operation of other filter elements.

3. Reasonable Design: No-bend pipe design, high-level stacked combination type, easy and quick installation.

4. Long Service Life: Under general environmental conditions, the filter element replacement cycle can reach about 2 years.

5. High Filtration Efficiency: Filtration precision of ≥1μm/99.96%, ≥2μm/99.99%, ≥3μm/100%, ensuring clean air intake.

6. Low Initial Resistance: Initial pressure loss ≤150 Pa, minimizing energy consumption.

Advantages

• Intelligent Operation: Multiple self-cleaning modes, realizing unattended automatic operation.

• Continuous Work: Self-cleaning process does not affect normal filtration, ensuring continuous air supply.

• Easy Installation: No-bend pipe and stacked design, convenient for on-site installation and maintenance.

• Long Filter Element Life: Extended replacement cycle reduces operating costs.

• High Efficiency & Low Resistance: High filtration efficiency with low pressure loss, protecting downstream equipment.

• Wide Application: Suitable for various gas-powered equipment and industrial air purification scenarios.

Application

• Air compressor stations, oxygen generation stations and air conditioning air supply systems.

• Gas turbines, blast furnace blowers and other gas-powered equipment.

• Industrial production processes requiring long-term continuous air purification.

• Dusty environments where manual cleaning is difficult.

• Air intake filtration of various industrial equipment to prevent dust wear and corrosion.