Equivalent Facet FIWA-336-0.5 Absorptive Cartridges Filters for petroleum water & solids removal

Introduction:

FIWA absorptive cartridges perform two jobs with one cartridge. It absorbs water and removes solids reliably and efficiently from a wide range of petroleum products. As the product stream flows from the outside of the cartridge to the inside, the FIWA special water absorbent medium retains water, and the pleats expand.

As the maximum water holding capacity is reached, there is a reduction in flow. The cartridge slows, then stops the flow of product as it reaches maximum capacity. This indicates that the cartridge is ready to be changed, assuring you of clean, dry product.

Benefits:

• Absorbs highly emulsified water to less than 5 ppm

• Provides positive shut-off —increased differential pressure signals cartridge change-out

• Holds larger amounts of water than competition

• Ultra fine particulate removal efficiencies

• High collapse rating of cartridges

• Quick, easy cartridge change-out

• Easy housing installation

Applications:

• Fuel dispensing pumps

• Off-road machinery

• Service stations

• Marinas

• Truck stops

• Bus fueling

• Diesel fuel

• Gasoline

• Kerosene

• Other engine fuels

• Various oils

Common models:

FIWA-210-0.5

FIWA-229-0.5

FIWA-230-0.5

FIWA-336-0.5

FIWA-512-0.5

FIWA-609-0.5

FIWA-629-0.5

FIWA-718-0.5

FIWA-736-0.5

FIWA-210-1

FIWA-229-1

FIWA-230-1

FIWA-336-1

FIWA-512-1

FIWA-609-1

FIWA-629-1

FIWA-718-1

FIWA-736-1

FIWA-210-3

FIWA-229-3

FIWA-230-3

FIWA-336-3

FIWA-512-3

FIWA-609-3

FIWA-629-3

FIWA-718-3

FIWA-736-3

FIWA-210-5

FIWA-229-5

FIWA-230-5

FIWA-336-5

FIWA-512-5

FIWA-609-5

FIWA-629-5

FIWA-718-5

FIWA-736-5

FIWA-210-10

FIWA-229-10

FIWA-230-10

FIWA-336-10

FIWA-512-10

FIWA-609-10

FIWA-629-10

FIWA-718-10

FIWA-736-10

FIWA-210-25

FIWA-229-25

FIWA-230-25

FIWA-336-25

FIWA-512-25

FIWA-609-25

FIWA-629-25

FIWA-718-25

FIWA-736-25

OD: 2.625, 3, 5.625, 6 inch

ID: 1.0625, 1.875, 1.5, 3.5, 2.625 inch

Length: 9.875, 29.25, 29.625, 35.75, 12.125, 9.75, 29, 18, 36 inch

Filtration material: Resin Impregnated Cellulose with Water

Absorptive Media

Micron: 0.5, 1, 3, 5, 10, 25 micron

Inner core: galvanized carbon steel

End caps: galvanized carbon steel

All metal components: treated to protect against

corrosion

Gasket material: Buna-N or optional

Recommended max. operating temperature: 225 °F (107 ºC)

Maximum differential pressure: 100 psi (6.9 bar)

pH range: 5~9

Flow direction: outside to inside