CA‑38‑5SB Screw‑Base Coalescer Filter Element For Aviation And Refinery Fuel Dehydration Workflow
CA‑38‑5SB screw‑base coalescer filter element, high‑performance multi‑layer glass fiber coalescing cartridge for aviation depots and refinery light hydrocarbon dehydration, breaks oil‑water emulsion and captures solid contaminants.
Product Introduction
Oil Filtration Machine delivers reliable Coalescer Filter consumables to solve common emulsion and water‑contamination troubles for aviation depots, refineries and bulk fuel terminals. CA‑38‑5SB coalescer filter element is screw‑base style coalescer cartridge, engineered for screw‑mount fuel coalescer‑separator vessels. It handles demulsification, tiny water droplet merging and solid particle interception for jet‑A1, kerosene and diesel fuel in continuous industrial fuel‑processing workflows.
Multi‑layer gradient glass‑fiber coalescing media is adopted for this coalescer cartridge. Polluted hydrocarbon fluid flows outside‑to‑inside through the depth‑type media stack. Stable oil‑in‑fuel emulsion is broken up, countless micro water droplets collide and merge into large‑sized droplets. Meanwhile solid particles such as rust, pipeline debris and granular sediments are trapped inside multi‑layer media. Screw‑base end‑cap guarantees tight sealing under frequent flow and pressure fluctuation on‑site.
CA‑38‑5SB coalescer must work with matched screw‑base separator filter element to finish complete two‑stage liquid‑liquid separation. Every finished cartridge will pass ISO 2941 collapse‑burst test, ISO 2942 media integrity inspection and ISO 2943 fluid compatibility test before factory shipment. Browse full series: Coalescer Filter Element.
Frequently Asked Questions
Q: What industrial sites are suitable for CA‑38‑5SB coalescer filter element?
A: Aviation fuel depot, refinery light‑hydrocarbon workshop, bulk fuel receiving terminal and mobile fuel‑handling skid with screw‑base filter‑separator housing.
Q: What does SB suffix stand for in model CA‑38‑5SB?
A: SB means screw‑base mounting interface, it can only fit screw‑type vessel, cannot swap with rod‑mount coalescer cartridge.
Q: Can CA‑38‑5SB coalescer run without supporting separator filter?
A: Not allowed. Coalescer only merges micro water droplets, matched separator element is required to block water penetration.
Q: When shall operators replace the whole coalescer‑separator set?
A: Replace full‑set coalescer and separator together when system differential pressure reaches 12‑15 psi.
Related Products:Coalescer Filter Element |Separator Filter Element
Product Technical Parameters
| Item | Specification |
| Main Reference Model | CA‑38‑5SB |
| Related Coalescer Series List | CA28‑3SB, CAA28‑5SB, CA33‑8SB, CAA33‑5SB, CA38‑3, CA38‑5SB, CA43‑5SB |
| Filter Media | Multi‑layer gradient glass‑fiber coalescing media |
| Mounting Type | Screw‑base (SB) |
| Micron Rating | 5 μm |
| Seal Gasket Options | Buna‑N / EPDM / Viton optional |
| Max Operating Temperature | 120℃ |
| Max Working Differential Pressure | 50 psid |
| Matched Separator Type | SM‑series screw‑base separator filter element |
| Test Standard | ISO 2941, ISO 2942, ISO 2943 |
| Applicable Vessel | Screw‑base style fuel coalescer‑separator housing |
Product Display
ONLINE MESSAGE