| Item | Lefilter CA11-3 Equivalent |
|---|---|
| Brand replaced | Facet CA11-3 |
| Outer diameter | 6 in (152 mm) |
| Inner diameter | 3½ in (89 mm) |
| Nominal length | 11¼ in (290 mm) |
| Mounting | Screw base or rod mount |
| End cap | Glass-filled nylon / treated metal |
| Seal | Buna-N standard; Viton optional |
The threaded stud and end-cap profile are verified against OEM samples before production, which means the element seats on the existing knife-edge adaptor and seals correctly on the first attempt — a common failure point with generic cartridges.

Graded borosilicate glass fiber in three density zones: coarse interception → gradient coalescing → drainage/support.
Coalescing rating: 3 μm; liquid aerosol removal efficiency above 99.6% at rated flow.
Max differential pressure: 75 psi (5.2 bar); recommended change-out at 15 psi (1 bar).
Temperature range: −40 °C to +80 °C standard; up to 115 °C with optional seals.
Flow direction: inside-to-outside, matching the original Facet CA architecture.
The 75 psi rating matters: economy cartridges often compress and channel at 40–50 psi, letting emulsified water slip past the coalescing zone. Lefilter's media holds its structure across the full service interval.
Aviation fuel dispensers and refueling skids · marine fuel polishing units · diesel transfer systems with confined housings · light hydrocarbon service where space is limited.
Is it a true drop-in replacement? Yes — dimensions, stud thread, end-cap profile, and gasket are built to original Facet specifications; no housing modification is needed.
What happens if I run past 15 psi ΔP? Media compression accelerates and coalescing efficiency drops; near 75 psi there is risk of collapse and water carryover. Replace at 15 psi.
Can it handle diesel as well as jet fuel? Yes — the glass fiber media is compatible with diesel, B20 blends, gasoline, and light hydrocarbons; only flow rate and change-out interval need adjustment for higher-viscosity fuels.
Do you supply aviation certification? Lefilter provides batch traceability and factory test reports. For EI 1581-qualified projects, confirm the production lot with our sales team before ordering.
ONLINE MESSAGE