CA33-5SB Equivalent — Extended-Length Coalescing for High-Dirt Fuel

OverviewThe CA33-5SB stretches the CA-series to 33 inches, trading vertical height for dirt-holding capacity and longer service intervals. It is the right choice when fuel arrives with elevated particulate loading — pipeline startup debris, tank bottom disturbance, or aged storage — and frequent change-outs are eroding maintenance budgets. Lefilter's equivalent keeps the full coalescing architecture while adding media volume where it counts.Compatibility & FitItemLefilter CA33-5SB EquivalentBrand replacedFacet CA33-5SBOuter diameter6 in (152 mm)Nominal length33 in (838 mm)MountingScrew baseEnd capGlass-filled nylonSealBuna-N standard; Viton optionalMedia & PerformanceExtended pleat pack raises surface area proportionally with length, so dirt holding capacity scales up without raising initial ΔP.Three-zone media: coarse pre-filter layer → gradient coalescing core → drainage and support structure.Coalescing rating: 3 μm; max ΔP: 75 psi; change-out at 15 psi.Structural

: :
CA33-5SB Equivalent — Extended-Length Coalescing for High-Dirt Fuel

Products

Expand the product menu to see a more detailed filter

Product Introduction

Overview

The CA33-5SB stretches the CA-series to 33 inches, trading vertical height for dirt-holding capacity and longer service intervals. It is the right choice when fuel arrives with elevated particulate loading — pipeline startup debris, tank bottom disturbance, or aged storage — and frequent change-outs are eroding maintenance budgets. Lefilter's equivalent keeps the full coalescing architecture while adding media volume where it counts.

Compatibility & Fit

ItemLefilter CA33-5SB Equivalent
Brand replacedFacet CA33-5SB
Outer diameter6 in (152 mm)
Nominal length33 in (838 mm)
MountingScrew base
End capGlass-filled nylon
SealBuna-N standard; Viton optional

Media & Performance

  • Extended pleat pack raises surface area proportionally with length, so dirt holding capacity scales up without raising initial ΔP.

  • Three-zone media: coarse pre-filter layer → gradient coalescing core → drainage and support structure.

  • Coalescing rating: 3 μm; max ΔP: 75 psi; change-out at 15 psi.

  • Structural rigidity: the longer span is supported by a reinforced center tube to prevent bowing under differential pressure — a weakness in unbranded long-format cartridges.

Applications

Refinery and terminal fuel polishing · marine bunker transfer filtration · diesel storage with known particulate ingress · high-dirt aviation fuel farm service.

FAQ — CA33-5SB Equivalent

  1. Will the longer element fit my existing housing? Only if your housing is designed for 33-inch CA-series cartridges; the element replaces the OEM part directly but cannot shorten a housing built for 22-inch elements.

  2. Does the extra length increase pressure drop? No — added pleat area offsets the flow path length, so initial ΔP stays close to the 22-inch equivalent.

  3. How much longer is the service interval? Typically 40–60% more dirt capacity than a 22-inch element in the same service, depending on fuel cleanliness.

  4. Is a reinforced center tube really necessary? Yes — on long-format cartridges, an unsupported tube can bow under ΔP, distorting the pleats and creating uneven flow that degrades water separation.

Product Technical Parameters

Product Display

Product Display
Product Display
Product Display
Product Display
Product Display
Product Display

ONLINE MESSAGE