At 43 inches nominal length, the CA43-3SB is the longest standard cartridge in the Facet CA family — the choice for large filter-separators where change-out frequency, not element price, dominates operating cost. Lefilter's replacement preserves the full graded media architecture while extending the pleat pack to maximum surface area, giving terminal operators the longest practical interval between element changes.
| Item | Lefilter CA43-3SB Equivalent |
|---|---|
| Brand replaced | Facet CA43-3SB |
| Outer diameter | 6 in (152 mm) |
| Nominal length | 43 in (1092 mm) |
| Mounting | Screw base |
| Center tube | High-rigidity treated steel |
| Seal | Buna-N; Viton optional |
Maximum pleat area in the CA-series: lowest face velocity per unit area, gentlest treatment of fragile water droplets, best coalescing efficiency at high flow.
Coalescing rating: 3 μm; liquid aerosol efficiency above 99.6% at rated flow.
Max ΔP: 75 psi; change-out at 15 psi.
High-rigidity center tube engineered for the 43-inch span — essential to prevent pleat distortion and flow maldistribution over the extended length.
Large terminal filter-separators · refinery product run-down filtration · marine bunkering skids with tall housings · aviation fuel farms with high throughput and infrequent maintenance windows.
Is the 43-inch element compatible with my housing? It fits housings designed for the 43-inch CA-series format; confirm housing depth before ordering.
Why choose 43-inch over two 22-inch elements? One long element means one seal interface instead of two — fewer potential bypass paths and faster change-outs.
Does the long span risk media collapse? Not with the reinforced center tube Lefilter specifies; economy long-format cartridges without rigid support are prone to bowing and channeling.
What flow rate can a single element handle? Rated flow follows the original Facet specification; do not exceed housing-rated flow, as over-speed increases face velocity and reduces water separation efficiency.
ONLINE MESSAGE