CC-62283 coalescing filter cartridge Parker Velcon replacement transformer oil and turbine oil dehydration and impurity removal

CC-62283 is a classic coalescing filter element used in the Parker Velcon CC series for insulation oil and turbine oil systems. It is installed in the primary coalescing section of the Filter/Separators, and one process simultaneously completes the tasks of "demulsification and dehydration" and "interception of solid particles". We are a filter cartridge manufacturer with 18 years of production experience. We have replicated this product 1:1 according to the original drawing number: outer diameter 152mm, inner diameter 82.5mm, total length 584mm, single end open threaded connection, folded glass fiber composite coalescing medium. It can be directly replaced with CC-62283 and CC62283 without changing the pipeline or shell, and is a direct replacement part that does not require modification. For users who are still operating the Velcon TO-30 insulation oil system and TOC series turbine oil coalescence device, this is a domestically produced alternative solution that can be directly adopt

: :
CC-62283 coalescing filter cartridge Parker Velcon replacement transformer oil and turbine oil dehydration and impurity removal

Products

Expand the product menu to see a more detailed filter

Product Introduction

Detailed explanation of technical parameters
The external dimensions of this filter element are an outer diameter of 152mm (6.0 inches), an inner diameter of 82.5mm (3.25 inches), and a total length of 584mm (22.25 to 23.0 inches). It adopts a single open end threaded connection structure and is fully fitted with the original shell end face after installation, without the need for any adapters. The filter material is a composite of folded glass fiber and cellulose, with an outer layer covered with a knitted sock to promote the detachment of water droplets after growth and reduce secondary entrainment. The central tube adopts an aluminum skeleton, which balances strength and corrosion resistance; The end cap is made of aluminum or fiberglass reinforced nylon material, which is bonded to the filter material as a whole through epoxy resin to avoid delamination under high pressure difference. The sealing ring comes standard with Buna-N rubber, which can be upgraded to FKM or PTFE according to the working conditions.

In terms of performance, the nominal filtering accuracy is 0.5 μ m, which belongs to the composite accuracy of aggregation and interception; The breaking strength shall not be less than 75 psi (approximately 5.2 bar); Recommend changing the pressure differential to 25 psi (approximately 1.7 bar); Applicable pH range 5 to 9; The maximum operating temperature for the conventional model is 71 ° C, while the high-temperature model can reach 107 ° C (225 ° F).


CA62202 Technical Data.png


Application scenarios and industries
The positioning of CC-62283 is "liquid-liquid separation+fine filtration", mainly serving occasions where there are clear indicators for oil cleanliness and moisture content:
-Transformer oil and insulation oil treatment system (TO-30 class): removes free water and fiber impurities, restores oil breakdown voltage and dielectric loss level;
-Turbine oil and turbine lubricating oil system (TOC-10, TOC-30): Separate emulsified water to suppress the increase of sludge, paint film, and acid value;
-Diesel and biodiesel (B20-B100): As the primary coalescence separator, it removes emulsified water and protects downstream fuel injection systems;
-Purification of light oil products such as gasoline and kerosene: equipped with coalescence and separation devices in oil depots and gas stations;
-Consumables for vacuum oil filters, coalescence separation oil filters, and complete sets of oil treatment equipment;
-Coverage industries: power (power plants, substations), petrochemical refining, metallurgy, ships, engineering machinery, oil depots, and oil trading.



Product Advantages
1. Installation size 1:1 replica: The outer diameter, inner diameter, total length, and interface form are consistent with the original factory, and can be directly replaced without involving pipe modification, flange modification, or shell modification;
2. Integration of aggregation and filtration: One layer of filter material simultaneously processes droplets and particles, resulting in a "dry and clean" oil output, reducing the burden of subsequent fine filtration;
3. Folding structure increases effective filtering area: achieving high flow rate and low pressure difference within the same shell, high pollutant holding capacity, and longer core replacement cycle;
4. Outer layer aggregation net design: promotes the shedding of water droplets after they grow up, improves dehydration efficiency, and reduces the risk of secondary entrainment



FAQ
Q1: Can CC-62283 and CC-62285 be used interchangeably?

No. Although both are 6-inch diameter threaded coalescing filter cartridges, CC-62283 has a length of 22.25 inches and is used for TO-30 insulation oil systems; CC-62285 has a length of 22 inches and is used for the TOC-10 turbine oil system. Its rated flow rate and matching casing are different. Mixing can lead to insufficient pressure on the end face, bypass leakage, and direct failure of dehydration effect.


Q2: What is the difference between a coalescing filter and a separating filter?

The coalescence filter is responsible for "enlarging water", capturing submicron emulsified water droplets, merging them into large water droplets in the medium, and sinking them into the water collection chamber at the bottom of the shell; The separation filter element is made of hydrophobic material, responsible for "blocking water", allowing oil to pass through, and blocking the enlarged water droplets on the outside for discharge. The two must work together in pairs, only changing aggregation without separation, as water will still be carried downstream.


Q3: When should this filter be replaced?

According to the pressure difference, it should be replaced when it reaches 25 psi (1.7 bar). Continuing to operate beyond this value will cause the saturated medium to push the captured water and impurities back into the oil flow, forming secondary entrainment, which is more dangerous than not installing a filter element. Additionally, it is recommended that if a sudden increase in water content or particle size is found during downstream sampling, even if the pressure difference is not high, the filter element perforation, end cap detachment, or sealing ring failure should be investigated.


Q4: What do the model prefixes "CC" and "I -" mean?

This is Velcon's naming convention for flow direction: the CC series is a coalescing filter element with an outward in flow and threaded interface; The I-series (such as I-62285, I-62287) is an inside out design, commonly used for aviation fuel filters/separators. The two cannot be interchanged, and the flow direction and interface form of the original machine casing must be confirmed before selection.


Q5: Is 0.5 μ m absolute accuracy or nominal accuracy?
It is nominal precision. The core indicators of a coalescing filter cartridge are not the absolute accuracy of particle retention, but the dehydration efficiency and pressure difference characteristics; The nominal value of 0.5 μ m indicates high capture capability for submicron sized emulsion droplets and fine particles. Evaluating this type of filter element should consider three factors simultaneously: downstream moisture content (ppm) after dehydration, rated pressure difference curve, and ISO cleanliness level, rather than just accuracy numbers.















Product Technical Parameters

Product Display

ONLINE MESSAGE