Customer Cases

Introduction:

The replacement Facet CIF Series high efficiency pleated paper filter cartridges are designed to effectively remove solid contaminants from fuels.

Media with high efficiency throughout the life of the cartridge is available in ratings from .5 to 5 microns. We recommend replacing cartridges when the differential pressure reaches 15 psi (1.03 bar). Effective life above 15psi (1.03 bar) is minimal.

All cartridges are 6" (152 mm) outside diameter. To simplify maintenance, we offer one piece cartridges in three lengths: single-length of 14½" (370 mm), double-length of 28¾" (730 mm) and triple-length of 43¼" (1090 mm). One triple-length cartridge replaces three single-length.

Benefits:

• Crushable—can reduce your disposal volume by approximately 80%

• No metal components

• Incinerable—check your local regulations

• Pleat spacers—designed for maximum utilization of the filter medium

• Flow rates are comparable to other 6" (152 mm) OD cartridges

• Cartridge alignment is executed at top of center tube—easier, quicker

• Lightweight—contributes to reducing changeout time

Standard Design Features:

• Recommended maximum operating temperature: 240 °F (115 ºC)

• pH range from 5 to 9

• Initial differential pressure: 2 psi (0.14 bar) or less

• Design collapse pressure: 75 psid (5.17 bar)

• Flow direction: Outside to in

Materials:

• Constructed with high efficiency pleated paper

• No metal components—end caps and center tubes are engineered plastics

• Gaskets are Buna-N—other materials available by request