JFS336-ETB-CE-FF Dry Gas Filter Cartridges for solid contaminant removal and pre-coalescing

Introduction:

The filter separators and dry gas filters are typically used in applications like compressor inlet, contactor protection, pipelines and meter stations. They are used for removing a wide range of solid contaminants including sand, iron oxide, iron sulphide from dry gas and for pre-coalescing droplets for easier second stage removal in filter separators.

Features and benefits:

• The blend of Tri-Lobal and cylindrical fibers in combination with the engineered gradient depth all in the same media matrix provides superior dirt loading compared to conventional depth cartridges.

• Coreless designs allow for easier disposal.

• Media layers can be customized for challenging applications and multiple surface coating options provide filtration flexibility.

• Textured cartridge with a coarse finish designed to improve filtration performance.

Common applications:

Compressor Suction/Discharge

Gas Transmission

Gas Gathering

Metering/Custody Transfer

Glycol Contactor Protection

Amine Contactor Protection

Natural Gas Pipelines

Fuel Gas

Downstream of Molecular

Sieve Contactor

Gas Storage

Utility & Instrument Air

Flow direction: outside to inside

Nominal sizes: 3.0”, 4.50”, 5.50”

Nominal lengths: 12”, 24”, 28”, 36”, 43”, 48”, 72”, 79”

Media type: depth style polyester, depth style polypropylene

Hardware materials:

Core: coreless, tin plated, stainless

Gasket: same as media type, Buna, Viton

End caps: stainless, tin

End cap configuration: closed end with bolt hole, double open ended

Efficiency: up to 99.98% of 0.3µ & larger

Maximum temperature: 240-degree F for polyester (above 200-degree F requires a core), 180-degree F for polypropylene

Recommended change-out PSID: 12 - 15 PSID