JFS524-FCV-CE-FF dry gas filter separator for Gas Transmission
Introduction:The filter separators and dry gas filters are typically used in applications like compressor inlet, contactor protection, pipelines and meter stations. They are used for removing a wide range of solid contaminants including sand, iron oxide, iron sulphide from dry gas and for pre-coalescing droplets for easier second stage removal in filter separators.Features and benefits:• The blend of Tri-Lobal and cylindrical fibers in combination with the engineered gradient depth all in the same media matrix provides superior dirt loading compared to conventional depth cartridges.• Coreless designs allow for easier disposal.• Media layers can be customized for challenging applications and multiple surface coating options provide filtration flexibility.• Textured cartridge with a coarse finish designed to improve filtration performance.Common applications:Compressor Suction/DischargeGas TransmissionGas GatheringMetering/Custody TransferGlycol Contactor ProtectionAmine Contactor Protec
Product Introduction
Introduction:
The filter separators and dry gas filters are typically used in applications like compressor inlet, contactor protection, pipelines and meter stations. They are used for removing a wide range of solid contaminants including sand, iron oxide, iron sulphide from dry gas and for pre-coalescing droplets for easier second stage removal in filter separators.
Features and benefits:
• The blend of Tri-Lobal and cylindrical fibers in combination with the engineered gradient depth all in the same media matrix provides superior dirt loading compared to conventional depth cartridges.
• Coreless designs allow for easier disposal.
• Media layers can be customized for challenging applications and multiple surface coating options provide filtration flexibility.
• Textured cartridge with a coarse finish designed to improve filtration performance.
Common applications:
Compressor Suction/Discharge
Gas Transmission
Gas Gathering
Metering/Custody Transfer
Glycol Contactor Protection
Amine Contactor Protection
Natural Gas Pipelines
Fuel Gas
Downstream of Molecular
Sieve Contactor
Gas Storage
Utility & Instrument Air
Product Technical Parameters
Nominal sizes: 3.0”, 4.50”, 5.50”
Nominal lengths: 12”, 24”, 28”, 36”, 43”, 48”, 72”, 79”
Media type: depth style polyester, depth style polypropylene
Hardware materials:
Core: coreless, tin plated, stainless
Gasket: same as media type, Buna, Viton
End caps: stainless, tin
End cap configuration: closed end with bolt hole, double open ended
Efficiency: up to 99.98% of 0.3µ & larger
Maximum temperature: 240-degree F for polyester (above 200-degree F requires a core), 180-degree F for polypropylene
Recommended change-out PSID: 12 - 15 PSID
Product Display
ONLINE MESSAGE