FO-472G Velcon Particle Filter Cartridge Horizontal Filter Separators Fiberglass Filter Cartridge Direct Swap Replacement

The FO series is a pre installed solid particle filter element, which is the first stage component of a horizontal filter separator. It only intercepts solid impurities such as rust, welding slag, and dust, and does not have the ability to coalesce and remove liquids. It is mainly used to protect the I-6 coalescence filter element at the rear end and extend the service life of the entire filter element.

: :
FO-472G Velcon Particle Filter Cartridge Horizontal Filter Separators Fiberglass Filter Cartridge Direct Swap Replacement

Products

Expand the product menu to see a more detailed filter

Product Introduction

Structural appearance

-Appearance: Full body pure white fiberglass pleated filter material

-Filter material: borosilicate glass fiber impregnated resin, multi-layer folded structure, large pollutant holding capacity, good water and heat resistance

-Skeleton: Inner and outer metal mesh, anti-corrosion coated carbon steel center pipe and end cap

-Sealing: Buna-N nitrile rubber sealing ring; Epoxy resin thermosetting sealing to prevent medium bypass short circuit

-Flow direction: from outside to inside


The FO series filter element is a key component in the natural gas processing process

Natural gas gathering and transmission pipelines: gas gathering stations, compressor stations, distribution stations, pipeline cleaning stations, terminal stations, etc.

Natural gas purification plants, long-distance pipeline stations.

Urban gas transmission and distribution network, gas power plants.

Non corrosive gas filtration: gas-liquid and liquid-solid separation of gases such as nitrogen, carbon dioxide, propane, butane, etc.


More models
FO-614PLF1/2
FO-614PLF1
FO-614PLF2
FO-614PLF5
FO-614PLF10
FO-614PLF25
FO-614PLF75
FO-718PL05
FO-718PL15
FO-718PL25
FO-736PL05
FO-822PL1/2


Product Technical Parameters

Modeltotal length (inches)filtration accuracy (99% weight efficiency)
FO-436G 35.750.5 microns
FO-436G535.751 micron
FO-436GA35.752 microns
FO-436GC35.755 microns
FO-472G71.8750.5 microns
FO-472GC71.8755 microns


General technical parameters:

Outer diameter: 4-1/2 inches, inner diameter: 3-3/8 inches

Maximum operating temperature: 200 ° F (approximately 93 ° C)

Flow direction: From outside to inside

Sealing material: Buna-N gasket

End cap material: aluminum plated steel, with corrosion resistance

Product Display

ONLINE MESSAGE