JFG‑536 Gas Filter Element For Natural Gas Metering‑Regulating Station
JFG‑536 gas filter element, mechanical interchange fiberglass‑based filter cartridge, used for solid particle and aerosol removal at natural gas metering‑regulating station, protects precision metering instruments.
Product Introduction
Oil Filtration Machine provides interchange gas‑phase filter spare parts for natural gas pipeline stations. JFG‑536 gas filter element is mechanical interchange fiberglass‑based gas filter cartridge matching PECO FG‑series. It is widely deployed at natural gas metering‑regulating station inlet, compressor suction and downstream process skid. Precision metering instruments are very sensitive to fine solid debris and oil mist aerosol, this filter element effectively blocks these contaminants and guarantees measurement accuracy.
Composite depth fiberglass media is adopted for JFG‑536. Polluted multi‑phase natural gas flows radially from outer side toward inner core. Solid impurities such as pipeline scale, sand are trapped in multi‑layer media, meanwhile liquid mist and hydrocarbon condensate aerosols get captured and coalesced. Outer dimension, inner bore and installation interface are fully consistent with original FG‑536, field staff can finish direct swap‑out without modifying filter‑separator vessel.
Deburred smooth metal end‑cap reduces scratch risk during on‑site cartridge replacement. Multiple micron‑grade options can be selected according to actual contaminant situation of on‑site gas source. Check category resource: Natural Gas Filter Element.
Frequently Asked Questions
Q: Can JFG‑536 directly replace original FG‑536 filter cartridge?
A: Yes, outer dimension, inner dimension and mounting interface are fully consistent for direct field swap‑out.
Q: What contaminants can JFG‑536 capture in natural gas?
A: Pipeline scale, sand, compressor lubricant oil mist, hydrocarbon condensate droplets and fine solid dust particles.
Q: Which filter vessels support JFG‑536 installation?
A: PECO 75,85,90,70 series filter‑separator vessels and dimension‑compatible competitor housings.
Q: What differential pressure value should trigger filter replacement alarm?
A: Recommended replacement threshold is 15 psid differential pressure.
Related Products:Natural Gas Filter Element |Gas Filter Element
Product Technical Parameters
| Item | Parameter |
| Main Reference Model | JFG‑536 |
| Related JFG‑series list | JFG‑12, JFG‑24, JFG‑312, JFG‑324, JFG‑336, JFG‑372, JFG‑536, JFG‑572 |
| Corresponding original FG‑series reference | FG‑12, FG‑24, FG‑312, FG‑324, FG‑336, FG‑372, FG‑536 |
| Filter Media | Fiberglass composite depth media |
| Available Micron Grades | 0.3 μm(A‑SCW),0.5 μm(A),1 μm,5 μm,10 μm,25 μm,50 μm |
| Max Differential Pressure(standard core) | 25 psid |
| Max Differential Pressure(high‑pressure reinforced core) | 145 psid |
| Recommended replacement differential pressure | 15 psid |
| Interchange For | PECO FG‑series gas filter element |
| Applicable Gas Medium | Natural gas, artificial gas, nitrogen, propane, butane(non‑corrosive gas) |
| Applicable Vessel | PECO 75 / 85 / 90 /70 series filter‑separator vessel |
Product Display
ONLINE MESSAGE